Icom IC-24AT Instruction Manual page 29

O =
4) Push [H/L/DTMF] to store the input digits.
5) Pusa [H/L/DTMF] or [PTT] to exit DTMF MEMORY mode.
Wen [H/L/DTMF] is pushed, the transceiver emits the
programmed code.
‫ل‬ ‫ه‬
- See Section 91, prea 1.
2) Push [PTT] to exit DTMF MEMORY mode.
3) To transmit the DTMF code in the selected channel:
- While pushing [PTT], push [H/L/DTMF].
9-1
rogramming a DTMF code
The transceiver has 4 DTMF memory channeis fcr storing your
most-often-used DTMF codes of up to 15 digiis
1) While pushing [FUNC], push [H/L/DTMF]. Then push
a digit key (1 ~ 4) or rotate the tuning control to select the
desired DTMF memory channel.
2) While pushing FUNC], push [8] (SET) to prepare pro-
gramming the DTMF memory.
o Previous programmed digits are sra:
3) Push the appropriate digit keys to input the DTMF code.
a When 15 digits are input, the transceiver stores the digits
automaticaily.
*Wnen entering a wrong digit, push Ee e Fj then
repeat step 2 above io cancel ine ente
wo
F ta.
c ‫ت‬‎
(£)
bech 0)
H//7:9* The programmed code is emitted.
| EXAMPLE: Programming digits of 1234587890 into DTMF memory channel T2.
E H/L/DT MF