Icom IC-24AT Instruction Manual page 19

BASIC OPERATION 5
ine tuning control changes the
Muy
TC
| ‫ی‬ — — — — 1 ane
: Memory channel
¡(DIAL SEL) to select tne dial
While pushing [FUNC], push [0
seiect step.
a Each push of [0] changes the steps.
(100 kHz ¬1 MHz > Memory channel)
s in case no dial select indicators appear, memory channel
numbers cen be changed bv the tuning control while
pushing C
(4) LOCK FUNCTION
The lock function electronically locks the tuning control
and keyboard to prevent the frequency from changing
accidentally.
1) Whiie pushing [FUNC], p
ON the lock function.
» "LOCK" appears.
2) To cancel the function, repeat
usn [D(CALL/LOCK) to turn
siep 1.
SETTING A TUNING OR DIAL SELECT STEP
ET MODE
i S USING ee
3 SETTING A TUNING STEP
|
und
PAT NT D 7 A PIT |
Push [ARCLA) to select VFO mode |
|
5 |
Push [Ci(V/U) to select the desired operating band, VHF
or UHF.
While pushing [FUNC], push [8] (SET) to enter SET |
mode |
2 Refer io 2. 8 icr SET mode details
|
Pusn (éi (v) or [+] (A) several times until "TS" |
appears as shown above. |
)
Rotate tne tuning conirci to select the desired tuning |
sien |
95, 10, 12.5, 15, 20, 25 and 50 KHz steps are available |
|
‫ن‬
pee s
|
|
|
|
|
|