13-4 Auto Power Off - Icom IC-24AT Instruction Manual

36
CLOCK AND TIMER OPERATION 13
13-4 Auto power off
The transceiver automatically turns OFF after the selected time
is reached when no switch is pushed or no signal is received.
Time can be set in 20, 40 and 50 min. intervals. The function
can also be deactivated using the "oFF" setting.
|
|
|
60 min. 4
min. 20 min. OFF
D While pushing [FUNC], push [9] (CLOCK) to enter CLOCK
mode.
DU eg
3) Rotate the tuning control to set the desired time or
function OFF.
4) Push [PTT] to set the condition and to exit CLOCK mode.
To turn ON the transceiver while in the off condition, turn
OFF then ON again using the [VOL] control.
[EXAMPLE]
Setting time at 9:30 and the power on time at 15:00.
al b y , Func) +‫‏‬ ‫وضو‬
(DEE ER
|
A dot appears when the
power on timer is ON.
0 0 ‫س‬ ‫س ر س‬ ‫ی ر س‬ ‫1 1 و ت ہ‬ [ 1 1 1 1 1 1 e r e e r a ‫‏‬ 5 7 5 6 1 1 0 1 0 0 0 0 0