Icom IC-24AT Instruction Manual page 33

SCAN OPERATION 10
(4) PROGRAMMING A MEMORY SKIP CHANNEL
Undesirable memory channels can be skipped during memory
scan. These skip channels are also skipped during priority
watch (memory scan watch) and the frequencies of the
cnannels are skipped during full or programmed scan.
Shows the skip channel.
f -DUP H
i p
| an 5‫ر‬‎ Ir Eso) A Cz
| 17 ‫اتا‬‎
i D
i
e
in a memory channel.
1) Push [B] (MR) to select MEMORY mode.
2) Select the memory channei to be progremmed as the skip
cnannel:
- Rotate the tuning control or push [B] several times then
push a digit key.
3) While pushing [FUNC], push
a "SKIP" appears.
[3] (SKIP) to program.
4) Repeat step 3 to delete the skip function from the memory
channel.
— usne SET MODE
8 FREQUENCY SKIP FUNCTION ON/OFF
Skip function is ON.
|
|
|
|
|
| 1) Push [A] (CLR) to select VFO mode.
2) While pushing [FUNC], push [8] (SE
mode.
» Hefer to p. 8 for SET mode details.
3) Push [*](v) or [4](A) several times until "PS" appears
as shown above.
4) Rotate the tuning control to turn ON or OFF ine fre-
quency skip function.
5) Push [A] (CLR) or [PTT] to set tne condition and to exit
SET mode.
NOTE: Once the function is set on a band, the setting
affecis another band.