Hardware Installation - SMC Networks WBR14S-N3 - annexe 1 Manual

Hardware Installation

1. Select a Site – Choose a proper place for the wireless AP/Router. In general,
the best location is at the center of your wireless coverage area, within line of
sight of all wireless devices. For optimum performance, consider these points:
• Mount the wireless AP/Router as high as possible above any obstructions in
the coverage area.
• Avoid mounting next to or near building support columns or other
obstructions that may cause reduced signal or null zones in parts of the
coverage area.
• Mount away from any signal absorbing or reflecting structures (such as those
containing metal).
Note: When choosing a site for mounting the router on a wall, consider the accessibility
for network cabling.
2. Mount the Wireless AP/Router – The wireless AP/Router can be mounted on
any horizontal surface.
Mounting on a wall or wood surface – The access point should be mounted
only to a wall or wood surface that is at least 1/2-inch plywood or its
equivalent.
• For wall or wood surface mounting, use a cross-head screwdriver and the
20-mm M4 tap screws (not included). Or, drill two holes and insert two hooks.
• Mount the access point to the screws or hooks.
Note: Mount the router with the front panel facing upward so that the status LED
indicators are clearly visible.
Hardware Installation
1
1-5