SMC Networks WBR14S-N3 - annexe 1 Manual page 70

5
System Configuration
WPS Function — Enables WPS, locks security settings, and refreshes WPS
configuration information.
• WPS – Enables WPS. (Default: Disable)
WPS Summary – Provides detailed WPS statistical information.
• WPS Current Status – Displays if there is currently any WPS traffic connecting to
the wireless AP/Router. (Options: Start WSC Process; Idle; Default: Idle)
• WPS Configured – States if WPS for wireless clients has been configured for this
device. (Default: no)
• WPS SSID – The service set identifier for WLAN1. (Default: SMC)
• WPS Auth Mode – The method of authentication used. (Default: Open)
• WPS Encryp Type – The encryption type used for WLAN1. (Default: None)
• WPS Default Key Index – Displays the WEP default key (1~4).
• WPS Key (ASCII) – Displays the WPS security key (ASCII) which can be used to
ensure the security of the wireless network.
• AP PIN – Displays the PIN Code for the wireless AP/Router. The default is
exclusive for each unit. (Default: 61461345)
5-36
Figure 5-24. WPS Settings