SMC Networks WBR14S-N3 - annexe 1 Manual page 90

A
Troubleshooting
Diagnosing LED Indicators
Symptom
POWER LED is Off
WLAN LED is Off
LAN/WAN LED is Off
(when port connected)
A-2
Troubleshooting Chart
Action
• The AC power adapter may be disconnected. Check connections
between the wireless AP/Router, the power adapter, and the wall
outlet.
• The wireless AP/Router's radio has been disabled through it's web
management interface. Access the management interface using a web
browser to enable the radio.
• Verify that the wireless AP/Router and attached device are powered
on.
• Be sure the cable is plugged into both the wireless AP/Router and
corresponding device.
• Verify that the proper cable type is used and its length does not exceed
specified limits.
• Check the cable connections for possible defects. Replace the
defective cable if necessary.