Pppoe - SMC Networks WBR14S-3GN User Manual

Barricade n draft 11n wireless 3g broadband router
Hide thumbs Also See for WBR14S-3GN:
Table of Contents

Advertisement

The following items are displayed on this page:
IP Address — The IP address of the wireless 3G Broadband Router.
Valid IP addresses consist of four decimal numbers, 0 to 255, separated
by periods.
Subnet Mask — The mask that identifies the host address bits used for
routing to specific subnets.
Default Gateway — The IP address of the gateway router for the
wireless 3G Broadband Router, which is used if the requested
destination address is not on the local subnet.
Primary DNS Server — The IP address of the Primary Domain Name
Server on the network. A DNS maps numerical IP addresses to domain
names and can be used to identify network hosts by familiar names
instead of the IP addresses. If you have one or more DNS servers
located on the local network, type the IP addresses in the text fields
provided. Otherwise, leave the addresses as all zeros (0.0.0.0).
Secondary DNS Server — The IP address of the Secondary Domain
Name Server on the network.
Enables the wireless 3G Broadband Router IP address to be assigned
PPP
E
O
automatically from an Internet service provider (ISP) through a DSL
modem using Point-to-Point Protocol over Ethernet (PPPoE).
Figure 25: PPPoE Configuration
– 50 –
| Network Settings
C
6
HAPTER
WAN Setting

Advertisement

Table of Contents
loading

This manual is also suitable for:

Barricade smcwbr14s-3gn

Table of Contents