Table of Contents
Advertisement
USB Port — Enables support for a WAN connection using a USB 3G
◆
modem. When enabled, you can select if the 3G modem connection
operates as the Master or Backup WAN link. (Default: Disabled)
◆
Master WAN — Enables the USB 3G modem WAN connection to
operate as the primary WAN link. The Ethernet WAN port then operates
as the backup link. (Default: Disabled)
Backup WAN — Enables the USB 3G modem WAN connection to
◆
operate as the backup to the Ethernet WAN port link.
(Default: Enabled)
◆
Fallback of Dual WAN — The operation of the fallback between dual
WAN connections is as follows: (Default: Disabled)
Enabled — The Master WAN connection is used first. Whenever this
■
connection is lost, the device automatically switches to the Backup
WAN. During the operation of the Backup WAN, the Master WAN link
is monitored for recovery of the lost connection. If the Master WAN
link is re-established, the WAN connection automatically switches
back to the Master from the Backup WAN connection.
Disabled — The Master WAN connection is used first. Whenever
■
this connection is lost, the device automatically switches to the
Backup WAN. The device will only switch back to the Master WAN if
the Backup connection is lost.
WAN connection test: Sets known IP addresses to ping on the WAN
◆
links to check for connectivity.
Detect IP Address of Master WAN — An IP address to which a
■
ping packet is sent to detect if the Master WAN connection is valid.
Detect IP Address of Backup WAN — An IP address to which a
■
ping packet is sent to detect if the Backup WAN connection is valid.
Ping Timeout — Sets the ping time out. (Range: 1~5 seconds;
■
Default: 3 seconds)
◆
Pin Code Protect — Enables the use of a PIN code (personal
identification number) to encrypt access to the 3G modem connection.
Some service providers do not require PIN code authentication. If a PIN
code is not required for your 3G or 3.5G modem, disable this function.
(Default: Disabled)
Dial Code — A dialled access code that connects the USB device to the
◆
service provider.
APN Service — The access point name (APN) that uniquely identifies
◆
the 3G or 3.5G service provider.
User Name — The user name of the account registered with the 3G or
◆
3.5G service provider.
– 40 –
| Initial Configuration
C
4
HAPTER
Setup Wizard
Advertisement
Table of Contents
