Table of Contents
Advertisement
The following items are displayed on this page:
PPPoE User Name — Sets the PPPoE user name for the WAN port.
◆
(Default: pppoe_user; Range: 1~32 characters)
PPPoE Password — Sets a PPPoE password for the WAN port.
◆
(Default: pppoe_password; Range: 1~32 characters)
Verify Password — Prompts you to re-enter your chosen password.
◆
Operation Mode — Selects the operation mode as Keep Alive, On
◆
Demand or Manual. (Default: Keep Alive)
Keep Alive Mode: The wireless 3G Broadband Router will
■
periodically check your Internet connection and automatically re-
establish your connection when disconnected. (Default: 60 seconds)
On Demand Mode: The maximum length of inactive time the unit
■
will stay connected to the DSL service provider before
disconnecting. (Default: 5 minutes)
Enables the Layer 2 Tunneling Protocol (L2TP) for implementing virtual
L2TP
private networks. The service is provided in many European countries.
Figure 26: L2TP Configuration
– 51 –
| Network Settings
C
6
HAPTER
WAN Setting
Advertisement
Table of Contents
