Table of Contents
Advertisement
S
3 - WAN
TEP
S
- S
IP
ETTINGS
TATIC
Configures a static IP for the WAN port.
Figure 14: Wizard Step 3 - WAN Settings - Static IP
The following items are displayed on this page:
Ethernet Port — Select "Static (Fixed IP)" for the WAN port connection
◆
from the drop-down list.
USB Port — Enables support for a WAN connection using a USB 3G
◆
modem. For more information, see
page
39. (Default: Disabled)
IP Address — The IP address of the wireless 3G Broadband Router.
◆
Valid IP addresses consist of four decimal numbers, 0 to 255, separated
by periods.
Subnet Mask — The mask that identifies the host address bits used for
◆
routing to specific subnets.
Default Gateway — The IP address of the gateway router for the
◆
wireless 3G Broadband Router, which is used if the requested
destination address is not on the local subnet.
Primary DNS Server — The IP address of the Primary Domain Name
◆
Server. A DNS maps numerical IP addresses to domain names and can
be used to identify network hosts by familiar names instead of the IP
addresses. To specify a DNS server, type the IP addresses in the text
field provided. Otherwise, leave the text field blank.
Secondary DNS Server — The IP address of the Secondary Domain
◆
Name Server.
– 34 –
| Initial Configuration
C
4
HAPTER
"Step 3 - WAN Settings - 3G" on
Setup Wizard
Advertisement
Table of Contents
