Wi-Fi Protected Setup (Wps) - SMC Networks WBR14S-3GN User Manual

W -F P S
I I ROTECTED
Encryption Type — The data encryption used on the WDS link. Be
◆
sure that both ends of a WDS link are configured with the same
encryption type and key. (Options: None, WEP, TKIP, AES.
Default: None)
Encryption Key — The encryption key for the WDS link. The key type
◆
and length varies depending on the encryption type selected. For WEP,
enter 5 alphanumeric characters or 10 hexadecimal digits for 64-bit
keys, or 13 alphanumeric characters or 26 hexadecimal digits for 128-
bit keys. For TKIP or AES, enter a password key phrase of between 8 to
63 ASCII characters, which can include spaces, or specify exactly 64
hexadecimal digits.
AP MAC Address — The MAC address of the other wireless 3G
◆
Broadband Router in the WDS link.
(WPS)
ETUP
Wi-Fi Protected Setup (WPS) is designed to ease installation and activation
of security features in wireless networks. WPS has two basic modes of
operation, Push-button Configuration (PBC) and Personal Identification
Number (PIN). The WPS PIN setup is optional to the PBC setup and
provides more security. The WPS button on the wireless 3G Broadband
Router can be pressed at any time to allow a single device to easily join the
network.
The WPS Settings page includes configuration options for setting WPS
device PIN codes and activating the virtual WPS button.
Click on "Wireless Settings," followed by "WPS".
Figure 53: Enabling WPS
The following items are displayed on this page:
◆ WPS — Enables WPS, locks security settings, and refreshes WPS
configuration information. (Default: Disabled)
C
HAPTER
– 86 –
| Wireless Configuration
7

Wi-Fi Protected Setup (WPS)