Protocol — Specifies the destination port type, TCP, UDP or ICMP.
◆
(Default: None).
Destination Port Range — Specifies the range of destination port to
◆
block traffic from the specified LAN IP address from reaching.
Source Port Range — Specifies the range of source port to block
◆
traffic from the specified LAN IP address from reaching.
Action — Specifies if traffic should be accepted or dropped. (Default:
◆
Accept)
◆
Comment — Enter a useful comment to help identify the filtering rules.
The Current Filter Table displays the configured IP addresses and ports that
C
F
URRENT
ILTER
are permitted or denied access to and from the wireless 3G Broadband
R
ULES
Router.
Select — Selects a table entry.
◆
◆
MAC Address — Displays a MAC address to filter.
Destination IP Address — Displays the destination IP address.
◆
Source IP Address — Displays the source IP address.
◆
Protocol — Displays the destination port type.
◆
◆
Destination Port Range — Displays the destination port range.
Source Port Range — Displays the source port range.
◆
Action — Displays if the specified traffic is accepted or dropped.
◆
Comment — Displays a useful comment to identify the routing rules.
◆
C
HAPTER
– 91 –
| Firewall Configuration
8
MAC/IP/Port Filtering