Table of Contents
Advertisement
WAN S
ETTING
The WAN Setting page specifies the Internet connection parameters. Click
on "Network Settings" followed by "WAN".
By default, the WAN port is configured with DHCP enabled. The options are
Static IP, DHCP (cable modem), PPPoE (DSL modem), PPTP, and L2TP. You
can also enable support for a USB 3G modem as a WAN connection, either
as a primary (Master) link, or as a backup to the WAN port link. Each
option selected changes the parameters that are displayed on the page.
Ethernet Port — Select the connection type for the WAN port from the
◆
drop-down list. (Default: DHCP).
Cable/Dynamic IP (DHCP) — See
■
Static (Fixed IP) — See
■
PPPoE (ADSL) — See
■
PPTP — See
"PPTP" on page
■
L2TP — See
"L2TP" on page
■
Disabled — Disables a WAN connection on the WAN port. A single
■
WAN connection can still be provided using the 3G USB port (see
"3G" on page
54).
USB Port — Enables support for a WAN connection using a USB 3G
◆
modem. For more information, see
Disabled)
Enable MAC Clone — Some ISPs limit Internet connections to a
◆
specified MAC address of one PC, which is registered with the ISP. This
setting allows you to manually change the MAC address of the Mini 3G
Broadband Router's WAN port to match the PC MAC address provided to
your ISP for registration. You can enter the registered MAC address
manually by typing it in the box provided. Otherwise, connect only the
PC with the registered MAC address to the Mini 3G Broadband Router,
then click the "Clone Your PC's MAC Address." (Default: Disabled)
If you are unsure of the PC MAC address originally registered by
N
:
OTE
your ISP, call your ISP and request to register a new MAC address for your
account. Register the MAC address of the Mini 3G Broadband Router.
– 48 –
C
HAPTER
"DHCP" on page
"Static IP" on page
49.
"PPPoE" on page
50.
53.
51.
"3G" on page
54. (Default:
| Network Settings
6
WAN Setting
49.
Advertisement
Table of Contents
