If the connection type detected is PPPoE, the screen shown in
a.
Figure 10
will display.
Figure 10: Quick Setup – PPPoE
User Name and Password — Enter the User Name and
●
Password provided by your ISP. These fields are case sensitive.
If you have difficulty with this process, contact your ISP.
If the connection type detected is Dynamic IP, the screen shown in
b.
Figure 12
will display. You can then continue with the wireless
configuration.
If the connection type detected is Static IP, the screen shown in
c.
Figure 11
will display.
Figure 11: Quick Setup - Static IP
IP Address - This is the WAN IP address as seen by external
●
users on the Internet (including your ISP). Enter the IP address
into the field.
Subnet Mask - The Subnet Mask is used for the WAN IP
●
address, it is usually 255.255.255.0.
Default Gateway - Enter the gateway IP address into the box,
●
if required.
Primary DNS - Enter the DNS Server IP address into the box, if
●
required.
– 34 –
| Quick Installation Guide
C
3
HAPTER
Quick Installation Guide