Table of Contents
Advertisement
Configuring Traffic Classes
IEEE 802.1p defines up to 8 separate traffic classes. This switch
supports Quality of Service (QoS) by using two priority queues,
with Weighted Fair Queuing for each port. You can use the 802.1P
Configuration menu to configure the default priority for each port,
or to display the mapping for the traffic classes as described in the
following sections. Also, refer to "Class-of-Service (CoS) Support"
on page 4-9.
Use <TAB> or arrows keys to move. <Enter> to select.
U
SING THE
802.1P Configuration : Selection Menu
====================
802.1P Port Priority Configuration ...
802.1P Port Traffic Class Information ...
<OK>
S
C
YSTEM
ONFIGURATION
P
ROGRAM
2-47
Advertisement
Table of Contents
