Displaying Port Statistics - SMC Networks 6900FSC - annexe 1 Management Manual

U S
SING THE YSTEM

Displaying Port Statistics

Port Statistics display key statistics from the Ethernet-like MIB for
each port. Error statistics on the traffic passing through each port
are displayed. This information can be used to identify potential
problems with the switch (such as a faulty port or unusually heavy
loading). The values displayed have been accumulated since the
last system reboot.
Select the required port. The statistics displayed are indicated in
the following figure and table.
Ether Like Counter:
Alignment Errors
FCS Errors
Single Collision Frames
Multiple Collision Frames :0
SQE Test Errors
Deferred Transmissions
[Refresh Statistics]
[Reset Counters]
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Menu
Alignment Errors
FCS Errors
Single Collision
Frames*
2-60
C
ONFIGURATION
Port Statistics : Unit 1 Port
===============
<PREV UNIT> <NEXT UNIT>
Description
The number of alignment errors
(mis-synchronized data packets).
The number of frames received that are an integral
number of octets in length but do not pass the FCS
check.
The number of successfully transmitted frames for
which transmission is inhibited by exactly one
collision.
P
ROGRAM
:0 Late Collisions
:0 Excessive Collisions
:0 Internal Mac Transmit Errors :0
Carrier Sense Errors
:0 Frames Too Long
:0 Internal Mac Receive Errors
<PREV PORT>
1
:9
:0
:0
:0
:0
Show port : 1
[Show]
<NEXT PORT>