Table of Contents
Advertisement
VLAN Port Configuration
Use this screen to configure port-specific settings for IEEE 802.1Q
VLAN features.
Parameter
PVID
Acceptable Frame
Type
Ingress Filtering
GVRP Status*
GVRP Failed
Registrations*
Description
The VLAN ID assigned to untagged frames received
on this port. Use the PVID to assign ports to the same
untagged VLAN.
This switch accepts "All" frame types, including VLAN
tagged or VLAN untagged frames. Note that all VLAN
untagged frames received on this port are assigned to
the PVID for this port.
If set to "True," incoming frames for VLANs which do
not include this port in their member set will be
discarded at the inbound port.
Enables or disables GVRP for this port. When
disabled, any GVRP packets received on this port will
be discarded and no GVRP registrations will be
propagated from other ports.
Note that GVRP must be enabled for the switch
before this setting to take effect. (See "Configuring
Bridge MIB Extensions" on page 3-29.)
The total number of failed GVRP registrations, for any
reason, on this port.
W
-B
M
EB
ASED
ANAGEMENT
3-39
Advertisement
Table of Contents
