SMC Networks 6900FSC - annexe 1 Management Manual page 29

Parameter
Default Gateway
IP State
U
SING THE
Description
Gateway used to pass trap messages from the system's
agent to the management station. Note that the gateway
must be defined if the management station is located in
a different IP segment. The default value is null.
Specifies whether IP functionality is enabled via manual
configuration, or set by Boot Protocol (BOOTP).
Options include:
USER-CONFIG - IP functionality is enabled based on the
default or user specified IP Configuration. (This is the
default setting.)
BOOTP Get IP - IP is enabled but will not function until
a BOOTP reply has been received. BOOTP requests will
be periodically broadcast by the switch in an effort to
learn its IP address. (BOOTP values can include the IP
address, default gateway, subnet mask, and TFTP server
IP.)
S C
YSTEM ONFIGURATION
P
ROGRAM
2-13