Table of Contents
Advertisement
Tip
Problem
A module was
When you install modules in the module slots, you must reset or reboot the switch so the
installed and the
switch processor can properly initialize and configure the module. The flashing LED
switch has not
informs you that the module is not initialized. The module will not work properly until the
yet been reset.
switch is reset or rebooted.
Diagnosing with the LEDs
Solution
Troubleshooting
3-7
Advertisement
Table of Contents
Need help?
Do you have a question about the 6624FMSC - annexe 1 and is the answer not in the manual?
Questions and answers