Installing The Smc6624M Switch; Included Parts - SMC Networks 6624FMSC - annexe 1 Installation Manual

Installing the SMC6624M Switch

The SMC6624M is easy to install. The switch comes with an accessory kit that
includes the brackets for mounting the switch in a standard 19-inch telco rack,
in an equipment cabinet, or on a wall, and with rubber feet that can be attached
so the switch can be securely located on a horizontal surface. The brackets
are designed to allow mounting the switch in a variety of locations and
orientations.
This chapter shows you how to install your SMC6624M switch.

Included Parts

The SMC6624M has the following components shipped with it:
I
I
I
I
I
I
TigerSwitch 10/100 SMC6624M Installation Guide (this manual)
TigerSwitch 10/100 SMC6624M Management Guide
RS-232 Console cable
SMC Warranty Registration Card—be sure to complete and return to SMC
Accessory kit
• two mounting brackets
• four 8-mm M4 screws to attach the mounting brackets to the switch
• four 5/8-inch number 12-24 screws to attach the switch to a rack
• four rubber feet
Power cord—either US, Continental Europe, or UK
2
2-1