Omtech LYF-20MP User Manual page 37

6. S e t v e c t o r g r a p h
parameters.
a. Select the picture.
b. Center the vector graphics on the canvas.
If the image is outside the canvas, select the image and click in the center of the canvas to
find the image.
c. Set the vector file parameters.
d. After setting the graphic size, click Apply.
to fill in the settings and click OK after completing the settings.
e. Click
f. Set processing parameters: speed, power, frequency.
See § Setting Engraving Parameters
e
b
c
d
on Page 33 for details.
32
f
a