Advertisement
11. Make sure that the driver has been installed successfully.
4.5.3 Running the EZCad Software
The EZCad software is included on the provided USB drive. You can use it without installation.
Familiarize yourself with your software's image design features and laser control settings before
beginning the operation of the laser marking machine. For instructions, see the EZCad manual on
the provided USB drive.
Double click EzCad2 to start the software.
1.
2. Click I agree.
3. Wait for a moment and make sure the software runs successfully.
24
Advertisement
Need help?
Do you have a question about the LYF-20MP and is the answer not in the manual?