Omtech LYF-20MP User Manual page 32

5 Operation
5.1 Operation Overview
• ALWAYS operate this machine following ALL the instructions provided
herein. Performance of procedures other than those specified herein may
result in property damage and personal injury.
• DO NOT use this machine for purposes not specified herein.
This section will address only some of the options and features provided by the operation
software EZCad for your reference. Before operating this machine, ensure that you have read and
understand this entire manual (particularly
EZCad software manual, and any warnings provided on the machine.
5.2 General Instructions
Anyone else who might be exposed to direct or reflected laser beams MUST
also wear protective eyewear.
material.
5.2.1 Turning On the Machine
• Turning the laser key and pressing the buttons out of order MAY cause
electrical hazards as the separate power supplies are grounded in order. Do
not activate everything quickly. Give each power supply time to come online,
activating its fans. Three seconds is sufficient.
• ONLY touch the components of this product with ONE HAND at a time
during use to reduce the risk of electric shock.
1. Remove the lens head cover.
§1 Safety Information
Put on any other PPE necessary for your
27
on Page 1), the separate