BRONKHORST FLEXI-FLOW Compact Instruction Manual page 7

1 General information
1.1 Scope of this document
This document contains information for basic installation, commissioning, operation and maintenance of the following FLEXI-
FLOW™ Compact models:
Model name
Preconfigured Standard flow controller
Preconfigured Advanced flow controller
Flow meter/controller
Flow controller with down ported fluid connectors
Flow controller with integrated shut-off valve
*) a=letter, n=digit, x=letter or digit
1.2 Declaration of conformity
The CE mark on the product indicates that it complies with requirements imposed by the European Union.
The UKCA mark on the product indicates that it complies with requirements imposed by the United Kingdom.
Declarations of Conformity applicable to standard Bronkhorst® products can be downloaded from
www.bronkhorst.com/downloads
1.3 Intended use
The FLEXI-FLOW has been developed to measure and/or control mass flow rates and pressures of clean, dry, non-corrosive and
non-toxic gases in a fluid system.
The product is suited for general purpose dry indoor applications, like laboratories and machine enclosures, applying media and
operating conditions within the limits as specified in the
Any other use is considered as not intended and improper. Improper use might cause damage to the product and/or propose
danger to users and/or bystanders and is therefore not permissible.
Responsibility for application of the product in accordance with its intended use, suitability for the intended application,
cleaning and compatibility of the used media with the applied materials lies solely with the user.
Bronkhorst High-Tech B.V. cannot be held liable for any damage and/or injury resulting from unintended, improper or unsafe
use.
9.17.158G
Bronkhorst®
FLEXI-FLOW™ Compact datasheet
Instruction Manual FLEXI-FLOW™ Compact
Model code*
FF-Sxxx
FF-Axxx
FF-ann
FF-annD
FF-annS
.
11
7