Thermal mass flow meters/controllers for liquids (50 pages)
Summary of Contents for BRONKHORST EL-FLOW Select
Page 1
Quick Start Guide for mass flow meter & controller EL-FLOW® Select F-110C, F-111B, F-11xAC, F-20xCV F-21xCV, F-20xAV, F-21xAV F-201CS IMPORTANT! Read carefully before use. Keep for future reference.
▶ If in any doubt: scan the QR code (Service & Support) on the The product requires professional experience and knowledge of back cover to get in contact with Bronkhorst. installation, operational requirements of the relevant industry, and knowledge of the type of application and national requirements ▶...
▶ If in any doubt: scan the QR code (Service & Support) on the product in a non-critical process. It guides the user in controlling back cover to get in contact with Bronkhorst. and monitoring research and pilot setups by means of The user is responsible for taking the necessary safety measures Bronkhorst FlowSuite.
Page 4
FLOW FLOW EL-FLOW® Select 1. Fluid inlet 5. Switch/Push button 9. Serial number label 2. Address selector (MSD) 6. Status LEDs 10. Fluid outlet 3. Address selector (LSD) 7. Connector 4. Connector (optional) 8. Control valve...
5. Custom* ▶ Scan the QR code (Service & Support) on the back cover. 6. RX-RS232/BUS ▶ Go to the Bronkhorst website and select your operating 7. +Us (15 ... 24 Vdc) system to download Bronkhorst FlowSuite. For download 8. 0 V sense information, see the back cover of this manual.
Mounting location To ensure reliable measurements, it is important to choose a correct mounting location. For optimal performance, observe the following guidelines: ▶ Install the product on a flat, rigid, and clean surface [1]. ▶ Avoid installation close to mechanical vibrations [2]. ▶...
Fluid line connection Electrical connection For basic setup, it is recommended to use Bronkhorst® CAUTION accessories (not included) as described in this manual. Risk of personal injury due to fluid leakage! ▶ Ensure all address selectors on the product are set to ‘0’ (zero).
Adding the product to Bronkhorst FlowSuite When Bronkhorst FlowSuite is started, the software will automatically search for connected instruments. All found instruments are displayed in the left pane. ▶ Use the refresh option to check for newly connected products. If the product is not found, it may not be set to serial RS-232.
Page 10
Product status in Bronkhorst FlowSuite If a connection between the product and Bronkhorst FlowSuite In Bronkhorst FlowSuite, an icon is displayed next to the product cannot be established, the switch/push button can be used to in the left pane. The icon indicates the status of the product. When...
Maintenance Technical specifications Although no routine maintenance is required, to ensure that the Description Unit Value product works correctly and safely, a regular (visual) inspection is Maximum fluid pressure bar(g) See serial number recommended. label Check prior to each use Permissible fluid temp.
(WEEE). Bronkhorst representative. Bronkhorst will take care of proper dismantling, recycling ▶ To help you quickly, make sure you have the serial number of and/or reuse. By ensuring this product is disposed of the product at hand.
Need help?
Do you have a question about the EL-FLOW Select and is the answer not in the manual?
Questions and answers