Instructions For Ezcad - Omtech LYF-175S User Manual

5.3.2 Instructions for EZCad

Click Laser → Rotate TextMark in EZCad to check and make sure the rotary settings are the
1.
same as that on the picture "Laser-Rotate TextMark-param.jpg" in the USB drive.
2. Set other rotary parameters.
For detailed instructions, see the EZCad software manual.
3. Prepare your design, test and engrave.
For detailed instructions, see
Engraving Effect (Page
§5.2.3 Preparing Your Design
§5.2.6 Engraving
40), (Page
44
OK Cancel Apply
(Page 36),
41).
§5.2.4 Testing the