Gossen MetraWatt METRA HIT MULTICAL Operating Instructions Manual page 4

Standard Equipment
Recalibration Service
Our service center calibrates and recalibrates (e.g. after one year as
part of your test equipment monitoring system, prior to use etc.)
all instruments from GMC-I Messtechnik GmbH and other
manufacturers, and offers free test equipment management.
Repair and Replacement Parts Service
Calibration Center* and Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nürnberg · Germany
Phone: +49 911 817718-0
Fax: +49 911 817718-253
e-mail: service@gossenmetrawatt.com
This address is only valid in Germany. Please contact our repre-
sentatives or subsidiaries for service in other countries.
* Calibration laboratory for measured electrical quantities,
DKD – K – 19701, accredited in accordance with
DIN EN ISO/IEC 17025:2005
Accredited measured quantities: direct voltage, direct current values,
DC resistance, alternating voltage, alternating current values, AC active
power, AC apparent power, DC power, capacitance, frequency and
temperature
4
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with
DIN EN ISO 9001:2000.
Our DKD calibration laboratory is accredited by the Deutscher
Kalibrierdienst (German Calibration Service) under registration
number DKD–K–19701 in accordance with DIN EN ISO/
IEC 17025:2005.
We offer a complete range of expertise in the field of metrology:
from test reports and proprietary calibration certificates right on up to
DKD calibration certificates.
Our spectrum of offerings is rounded out with free test equipment
management.
As a full service calibration laboratory, we can calibrate
instruments from other manufacturers as well.
Contact Persons
GMC-I Messtechnik GmbH