Intelligent Weighing Technology IDC-12 Service Manual page 19

The scale can be controlled with following commands.
Basic Commands:
PLUxx Select PLU from scale memory
T Tare current weight value
T123.456 Numeric tare value
Z Zero
P Print
M+ Store and print current results
MR Recall memory values to scale display
MC Clear memory
U123.456 Store unit weight of 123.456 kg / lb
S123
Enter sample size of parts 123 . Same as pressing
SL Select local scale to be used
SR Select remote scale to be used
Printing Commands:
\L
\I
\S
\N
\G
\T
\U
\P
\C
\W
\M
\B
PLU entry using RS 232 interface
This will allow the scale data to be sent from a PC program as well as from the keypad.
The most common PLUs can be stored and recalled from the scale memory. Other PLU
data can be stored on a PC, then the text data, unit weight and tare data can be sent
from the PC to PLU00. This can then be used and over written each operation.
OPERATION:
 Send tare data to set any tare value to be stored with PLU. i.e. "T0.150" <CR>. If
no tare is needed then you may send T0 to delete any present tare data.
 Send the unit weight to be stored with PLU. ie. "U12.3456" <CR>
Scale: Local or Remote
User ID number
Scale ID number
Net weight
Gross Weight
Tare weight
Unit weight
Count
Total Count
Total Weight
Number of items stored in memory
A blank / space line
- 19 -