Coltene Coltolux Comfort Owner's Manual page 18

Owner's Guide
Recommended separation distances between portable and mobile RF communications equipment and the Coltolux Comfort unit
The Coltolux Comfort unit is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled . The customer or the user of the
Coltolux Comfort unit can help prevent electromagnetic interference by maintaining a minimum distance between the portable and mobile RF communications
equipment (transmitters) and the Coltolux Comfort unit as recommended below, according to the maximum output power of the communications equipment .
Rated maximum output power of
transmitter in watts (W)
0 . 0 1
0 . 1
1 . 0
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation
applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter
manufacturer .
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies .
NOTE 2 These guidelines may not apply in all situations . Electromagnetic propagation is affected by absorption and reflection from structures, objects and people .
18
EN/IEC 60601 - 1-2:2014
Separation distance according to frequency of transmitter in meters (m)
150kHz to 80MHz
d = 1 . 2 √P
. 1 2
. 3 8
1 . 2
3 . 8
12
80MHz to 800MHz
d = 1 . 2 √P
. 1 2
. 3 8
1 . 2
3 . 8
12
800MHz to 2 . 5 GHz
d = 2 . 3 √P
. 2 3
. 7 3
2 . 3
7 . 3
23