Table of Contents
Advertisement
MAIN INDEPENDENT CONTROLS
CONTROLS ON LEFT HANDLEBAR
NOTE
The electrical parts work only when the ignition switch
is in position "".
1) HORN PUSH BUTTON ()
The horn is activated when the push button is pressed.
2) DIRECTION INDICATOR SWITCH ()
To indicate the turn to the left, move the switch to the left; to
indicate the turn to the right, move the switch to the right.
To turn off the direction indicator, press the switch.
3) DIMMER SWITCH ( - )
When the light switch is in position "": if the dimmer switch
is in position "", the high beam comes on; while if it is in
position "", the low beam comes on.
46
use and maintenance RSV mille TUONO
- RSV mille R TUONO
3) DIMMER SWITCH ( - )
When it is in position "" the parking lights, the dashboard
light and the low beam are always on.
When it is in position "", the high beam comes on.
4) LIGHT SWITCH ( - -
When the light switch is in position "
the switch is in position "", the parking lights and the
dashboard light are on; when the switch is in position "", the
parking lights, the dashboard light and the low beam are on.
The high beam can be operated by means of the dimmer
switch.
5) PASSING PUSH BUTTON ()/LAP PUSH BUTTON
(multifunction)
N O T E
F o r t h e s e t t i n g o f t h e f u n c t i o n s , s e e p . 4 0
(MULTIFUNCTION COMPUTER).
This push button makes it possible to use the passing button
in case of danger or emergency, or displays the various
preset functions on the right multifunction display:
– hour and minutes;
– coolant temperature (°C or °F);
– chronometer.
The passing is operated by pressing the push button,
independently of the position of the light switch ( - -
NOTE
To disconnect the passing, release the push button.
6) COLD START LEVER ()
The starter for the cold start of the engine is operated by
rotating the lever "" downwards.
To disconnect the starter, move the lever "" to its initial
position.
) (not provided for )
•
•
", the lights are off; when
•
).
Hide quick links:
Advertisement
Table of Contents
