Special Tools; Accessories; Number Plate-Holder Extension - APRILIA RSV MILLE R TUONO - 2002 Manual

SPECIAL TOOLS 
To perform some specific operations, it is
advisable to use the following special tools
(to be requested to an aprilia Official
Dealer):
Tool Operations
Pins (1) for the rear
service stand, see p.
To position the vehicle
96 (ASSEMBLING
on the rear service
THE PINS FOR THE
stand.
REAR SERVICE
STAND )
Engine oil and engine
oil filter change.
Rear service stand (2),
Rear wheel
see p. 96
disassembly.
(ASSEMBLING THE
PINS FOR THE REAR
Drive chain
SERVICE STAND
adjustment.
).
Removal of the lower
fairing.
Front service stand (3),
see p. 96
Front wheel
(ASSEMBLING THE
disassembly.
PINS FOR THE REAR
SERVICE STAND ).
Click clamp (4)
installation pliers, see Click clamp
p. 91 (CLICK installation.
CLAMPS).
52
use and maintenance RSV mille TUONO

ACCESSORIES

The following accessories:
– "R" front fork,
– "R" rear shock absorber,
– Non-adjustable steering damper on version
RSV mille TUONO, adjustable steering
damper on version RSV mille R TUONO,
supplied as standard equipment with the
RSV mille R, can also be installed on the
RSV mille (contact an aprilia Official
Dealer).
 
- RSV mille R TUONO
N U M B E R P L AT E - H O L D E R
EXTENSION 
The number plate-holder extension (5) can
be used when the road surface is wet, in
fact it reduces the reach of the water spray
caused by the rear wheel.
NOTE
The number
extension (5) is supplied as standard
component in the countries where this is
required for the homologation.
plate-holder