APRILIA RSV MILLE - 2002 Manual page 104

PARKING LIGHT BULB
◆
Remove the front part of the fairing, see
p. 80 (REMOVING THE FRONT PART
OF THE FAIRING).
To extract the bulb socket, do not pull
the electric wires.
◆
Grasp the parking light bulb socket (8),
pull it and remove it from its seat.
◆
Withdraw the bulb (2) and replace it with
one of the same type.
NOTE
Make sure that the bulb is cor-
rectly inserted in the bulb socket.
104
use and maintenance RSV mille
9
LOW BEAM BULB
NOTE
one, in such a way as to avoid positioning
them wrongly upon reassembly.
If it is necessary to remove all the con-
nectors at the same time, mark them and
make sure that you position them correctly
upon reassembly.
◆
Remove the front part of the fairing, see
p. 80 (REMOVING THE FRONT PART
OF THE FAIRING).
◆
Move the protection element (9) with
your hands.
To extract the bulb electric connector,
do not pull its wires.
◆
Grasp the bulb electric connector (10),
pull it and disconnect it from the bulb.
! !
- RSV mille R
10
Extract the connectors one by
A
11
12
◆
Release the two ends of the check
spring (11) positioned on the bulb socket
(12).
◆
Extract the bulb from its seat.
NOTE
Insert the bulb in the bulb socket,
making the respective positioning seats (A)
coincide.
◆
Correctly install a new bulb of the same
type.
Upon reassembly:
NOTE
Put back the protection element
( 9 ) w i t h t h e c a b l e p a s s a g e f a c i n g
downwards.
A