Special Tools; Accessories; Number Plate-Holder Extension - APRILIA RSV MILLE - 2002 Manual

SPECIAL TOOLS %

To perform some specific operations, it is
advisable to use the following special tools
(to be requested to an aprilia Official De-
aler):
Tool Operations
Pins (1) for the rear
support stand, see
p. 67 (ASSEM- To position the vehi-
BLING THE PINS cle on the rear sup-
FOR THE REAR port stand.
SUPPORT STAND
%).
Engine oil and en-
gine oil filter change.
Rear support stand
Rear wheel disas-
(2), see p. 67 (PO-
sembly.
SITIONING THE
VEHICLE ON THE
Drive chain adjust-
REAR SUPPORT
ment.
STAND %).
Removal of the low-
er fairing.
Front support stand
(3), see p. 67 (PO-
SITIONING THE Front wheel disas-
VEHICLE ON THE sembly.
FRONT SUPPORT
STAND %).
Click clamp (4) in-
stallation pliers, see Click clamp installa-
62 (CLICK tion.
CLAMPS).
32
use and maintenance RSV mille

ACCESSORIES

The following accessories:
– "R" front fork;
– "R" rear shock absorber;
– adjustable steering damper;
supplied as standard equipment with the
RSV mille R, can be installed also on the
RSV mille (contact an aprilia Official De-
aler).
! !
- RSV mille R
NUMBER PLATE-HOLDER
EXTENSION %
The number plate-holder extension (5) can
be used when the road surface is wet, in
fact it reduces the reach of the water spray
caused by the rear wheel.
NOTE
The number plate-holder exten-
sion (5) is supplied as standard component
in the countries where this is required for
the homologation.