Debug Log Commands - ZyXEL Communications UAG Series User Manual

Chapter 51 Logs

51.1.3 Debug Log Commands

This table lists the commands for the debug log settings.
Table 167 logging Commands: Debug Log Settings
COMMAND
show logging debug status
show logging debug entries [priority pri]
[category module_name] [srcip ip] [dstip ip]
[service service_name] [srciface interface_name]
[dstiface interface_name] [protocol protocol]
[begin <1..512> end <1..512>] [keyword keyword]
show logging debug entries field field [begin
<1..1024> end <1..1024>]
[no] logging debug suppression
[no] logging debug suppression interval
<10..600>
clear logging debug buffer
This table lists the commands for the remote syslog server settings.
Table 168 logging Commands: Remote Syslog Server Settings
COMMAND
show logging status syslog
[no] logging syslog <1..4>
[no] logging syslog <1..4> address {ip | hostname}
[no] logging syslog <1..4> {disable | level normal |
level all}
[no] logging syslog <1..4> facility {local_1 |
local_2 | local_3 | local_4 | local_5 | local_6 |
local_7}
[no] logging syslog <1..4> format cef
274
DESCRIPTION
Displays the current settings for the debug log.
Displays the specified entries in the system log.
pri: alert | crit | debug | emerg | error | info | notice | warn
keyword: You can use alphanumeric and
characters, and it can be up to 63 characters long. This searches
the message, source, destination, and notes fields.
Displays the specified field in the debug log.
field: time | msg | src | dst | note | pri | cat | all
Enables log consolidation in the debug log. The
disables log consolidation in the debug log.
Sets the log consolidation interval for the debug log. The
command sets the interval to ten.
Clears the debug log.
DESCRIPTION
Displays the current settings for the remote servers.
Enables the specified remote server. The
disables the specified remote server.
Sets the URL or IP address of the specified remote server.
The command clears this field.
no
hostname: You may up to 63 alphanumeric characters,
dashes (-), or periods (.), but the first character cannot be
a period.
Specifies what kind of information, if any, is logged for the
specified category.
Sets the log facility for the specified remote server. The
command sets the facility to local_1.
Sets the format of the log information.
cef: Common Event Format, syslog-compatible format.
()+/:=?!*#@$_%-
command
no
no
command
no
no
UAG CLI Reference Guide