Reports And Reboot - ZyXEL Communications ZYWALL - CLI Reference Manual

C
H A P T E R
This chapter provides information about the report associated commands and how to restart
the ZyWALL using commands. It also covers the daily report e-mail feature.
39.1 Report Commands Summary
The following sections list the report and session commands.
39.1.1 Report Commands
This table lists the commands for reports.
Table 189 report Commands
COMMAND
[no] report
show report status
clear report [interface_name]
show report [interface_name {ip | service |
url}]
ZyWALL (ZLD) CLI Reference Guide

Reports and Reboot

DESCRIPTION
Begins data collection. The
data collection.
Displays whether or not the ZyWALL is collecting
data and how long it has collected data.
Clears the report for the specified interface or for all
interfaces.
Displays the traffic report for the specified interface
and controls the format of the report. Formats are:
ip - traffic by IP address and direction
service
- hits by URL
url
39
no command stops
- traffic by service and direction
339