ZyXEL Communications ZYWALL - CLI Reference Manual page 327

8 After the transfer is complete, "Firmware received" or "ZLD-current received" displays.
Wait (up to four minutes) while the ZyWALL recovers the firmware.
Figure 43 Firmware Received and Recovery Started
9 The console session displays "done" when the firmware recovery is complete. Then the
ZyWALL automatically restarts.
Figure 44 Firmware Recovery Complete and Restart
10 The username prompt displays after the ZyWALL starts up successfully. The firmware
recovery process is now complete and the ZyWALL is ready to use.
ZyWALL (ZLD) CLI Reference Guide
Chapter 37 File Manager
327