Reboot - ZyXEL Communications EX3510-B0 User Manual

Chapter 35 Backup/Restore
Figure 173 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your Zyxel Device.
Refer to Section 1.5.4 on page 23 for more information on the RESET button.

35.3 Reboot

System Reboot allows you to reboot the Zyxel Device remotely without turning the power off. You may
need to do this if the Zyxel Device hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the Zyxel Device reboot. This does not affect the
Zyxel Device's configuration.
Figure 174 Maintenance > Reboot
EX3510-B0 User's Guide
268