ZyXEL Communications ZYWALL - CLI Reference Manual page 285

Table 159 Endpoint Security Object Commands
COMMAND
show eps signature {anti-virus |
personal-firewall | status}
[no] eps rename profile_name
new_profile_name
34.1.3 Endpoint Security Object Command Example
Peter wants to create and display an endpoint security object named EPS-Example. Only the
computers that match the following criteria can access the company's SSL VPN:
• Operating system: Windows XP
• Windows auto update: enabled
• Windows service pack: 2 or above
• Personal firewall: Windows firewall installed and enabled
• Anti-Virus: Kaspersky Anti-Virus v2010 installed and enabled
However, he needs to check the Anti-Virus software name defined on the ZyWALL. The
following example shows how to check all available Anti-Virus software packages for which
the ZyWALL's endpoint security can check. Copy and paste the name of the output item 20 for
the setting later.
Router> configure terminal
Router(config)# show eps signature anti-virus
No. Name
=========================================================================
1 Kaspersky_Anti-Virus_v2009
2 Kaspersky_Anti-Virus_v2010
3 Kaspersky_Internet_Security_v2009
4 Kaspersky_Internet_Security_v2010
5 Norton_Anti-Virus_v2010
6 Norton_Internet_Security_v2010
7 Norton_360_v3
8 Microsoft_Security_Center
9 TrendMicro_PC-cillin_AntiVirus_v2010
10 TrendMicro_PC-cillin_Internet_Security_v2010
11 TrendMicro_PC-cillin_Internet_Security_Pro_v2010
12 Avira_Antivir_Personal_v2009
noRouter(config)#
ZyWALL (ZLD) CLI Reference Guide
DESCRIPTION
Displays all the anti-virus software packages, personal firewall
software packages or EPS signature information respectively.
The status command displays the EPS signature version, release
date and the total number of software packages for which the
ZyWALL's endpoint security can check.
Changes an endpoint security object name.
Chapter 34 Endpoint Security
Detection
yes
yes
yes
yes
no
no
no
yes
yes
yes
yes
285