ZyXEL Communications ZYWALL - CLI Reference Manual page 104

Zld based
Table of Contents

Advertisement

Chapter 10 Zones
10.2 Zone Commands Summary
The following table describes the values required for many zone commands. Other values are
discussed with the corresponding commands.s
Table 53 Input Values for Zone Commands
LABEL
profile_name
This table lists the zone commands.
Table 54 zone Commands
COMMAND
show zone [profile_name]
show zone binding-iface
show zone default-binding
show zone none-binding
show zone system-default
show zone user-define
[no] zone profile_name
zone profile_name
[no] block
[no] interface interface_name Adds the specified interface to the specified zone. The
[no] crypto profile_name
[no] sslvpn profile_name
104
DESCRIPTION
The name of a zone, or the name of a VPN tunnel.
For the ZyWALL USG 300 and above, use up to 31 characters (a-zA-Z0-9_-). The
name cannot start with a number. This value is case-sensitive.
The ZyWALL USG 100 and 200 models use pre-defined zone names like DMZ,
LAN1, SSL VPN, WLAN, IPSec VPN, OPT, and WAN.
DESCRIPTION
Displays information about the specified zone or about
all zones.
Displays each interface and zone mappings.
Displays the pre-configured interface and zone
mappings that come with the ZyWALL.
Displays the interfaces, tunnels and SSL VPNs that are
not associated with a zone yet.
Displays the pre-configured default zones that you
cannot delete from the ZyWALL.
Displays all customized zones.
Creates the zone if necessary and enters sub-
command mode. The
Enter the sub-command mode.
Blocks intra-zone traffic. The
zone traffic.
no
specified zone. See
information about interface names.
Adds the specified IPSec VPN tunnel to the specified
zone. The
VPN tunnel from the specified zone.
Adds the specified SSL VPN tunnel to the specified
zone. The
VPN tunnel from the specified zone.
no
command deletes the zone.
no
command removes the specified interface from the
Section 6.2 on page 51
no
command removes the specified IPSec
command removes the specified SSL
no
ZyWALL (ZLD) CLI Reference Guide
command allows intra-
for

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents