Ssl Application - ZyXEL Communications ZYWALL - CLI Reference Manual

C
H A P T E R
This chapter describes how to configure SSL application objects for use in SSL VPN.
33.1 SSL Application Overview
Configure an SSL application object to specify a service and a corresponding IP address of the
server on the local network. You can apply one or more SSL application objects in the VPN >
SSL VPN screen for a user account/user group.
33.1.1 SSL Application Object Commands
This table lists the commands for creating SSL application objects. You must use the
configure terminal
commands.
Table 157 SSL Application Object Commands
COMMAND
show sslvpn application
[application_object]
[no] sslvpn application
application_object
server-type {file-sharing |
owa | web-server} url URL
[entry-point entry_point]
ZyWALL (ZLD) CLI Reference Guide

SSL Application

command to enter the configuration mode before you can use these
DESCRIPTION
Displays SSL VPN application objects.
Enters the sub-command mode to create an SSL VPN application
object.
Specify the type of service for this SSL application.
file-sharing: create a file share application for VPN SSL.
owa: (Outlook Web Access) to allow users to access e-mails,
contacts, calenders via an Microsoft Outlook-like interface using
supported web browsers. The ZyWALL supports one OWA object.
web-server: to allow access to the specified web site hosted on the
local network.
url: Enter the fully qualified domain name (FQDN) or IP address of
the application server. You must enter the "http://" or "https://" prefix.
Remote users are restricted to access only files in this directory. For
example, if you enter "\remote\" in this field, emote users can only
access files in the "remote" directory.
entry-point: optional. Specify the name of the directory or file on
the local server as the home page or home directory on the user
screen.
33
277