Table of Contents
Advertisement
C
H A P T E R
Use ISP accounts to manage Internet Service Provider (ISP) account information for PPPoE/
PPTP interfaces.
32.1 ISP Accounts Overview
An ISP account is a profile of settings for Internet access using PPPoE or PPTP.
32.1.1 PPPoE and PPTP Account Commands
The following table lists the PPPoE and PPTP ISP account commands.
Table 155 PPPoE and PPTP ISP Account Commands
COMMAND
show account [pppoe profile_name | pptp
profile_name]
[no] account {pppoe | pptp} profile_name
[no] user username
[no] password password
[no] authentication {chap-pap | chap | pap
| mschap | mschap-v2}
[no] compression {on | off}
[no] idle <0..360>
ZyWALL (ZLD) CLI Reference Guide
ISP Accounts
DESCRIPTION
Displays information about the specified
account(s).
Creates a new ISP account with name
profile_name if necessary and enters sub-
command mode. The
no
command deletes the
specified ISP account.
profile_name: use 1-31 alphanumeric
characters, underscores(
_
), or dashes (-), but the
first character cannot be a number. This value is
case-sensitive.
Sets the username for the specified ISP account.
The
no
command clears the username.
username: You can use alphanumeric,
underscores (_), dashes (-), and
and it can be up to 30 characters long.
Sets the password for the specified ISP account.
The
no
command clears the password.
password: You can use up to 63 printable ASCII
characters. Spaces are not allowed.
Sets the authentication for the specified ISP
account. The
command sets the authentication
no
to chap-pap.
Turns compression on or off for the specified ISP
account. The
command turns off compression.
no
Sets the idle timeout for the specified ISP account.
The
no
command sets the idle timeout to zero.
32
/@$
characters,
273
Hide quick links:
Advertisement
Table of Contents
