ZyXEL Communications ZYWALL - CLI Reference Manual page 311

36.11 Vantage CNM
Vantage CNM (Centralized Network Management) is a browser-based global management
solution that allows an administrator from any location to easily configure, manage, monitor
and troubleshoot ZyXEL devices located worldwide. See the Vantage CNM User's Guide for
details.
If you allow your ZyWALL to be managed by the Vantage CNM server, then you should not
do any configurations directly to the ZyWALL (using either the web configurator or
commands) without notifying the Vantage CNM administrator.
36.11.1 Vantage CNM Commands
The following table describes the commands available for dial-in management. You must use
the
configure terminal
these commands.
Table 175 Command Summary: Vantage CNM
COMMAND
[no] cnm-agent manager url
[no] cnm-agent activate
cnm-agent keepalive
interval <10..90>
[no] cnm-agent periodic-
inform activate
cnm-agent periodic-inform
interval <10..86400>
cnm-agent trigger-inform
[interval]
[no] cnm-agent auth
activate
show cnm-agent
configuration
[no] cnm-agent acs username
<username for ACS
connection request>
[no] cnm-agent acs password
<password for ACS
connection request>
[no] cnm-agent username
<TR-069 username>
ZyWALL (ZLD) CLI Reference Guide
command to enter the configuration mode before you can use
DESCRIPTION
Sets up the URL of the Vantage server that the ZyWALL registers with.
Include the full HTTPS or HTTP URL. For example, https://1.2.3.4/vantage/
TR069.
Turns management through Vantage CNM on or off.
Sets the keepalive interval.
Turns the periodic inform on or off.
Sets the periodic inform interval.
initiates a TR069 connection to the server. You can also specify the interval for
the inform messages.
Enables or disables authentication of the server when using HTTPS.
Displays the Vantage CNM configuration.
Configure the username of the ACS (Auto-Configuration Server) connection
request for the ZyWALL to authenticate the server using HTTP digest
authentication.
No removes the username of the ACS connection request.
Configure the password of the ACS (Auto-Configuration Server) connection
request for the ZyWALL to authenticate the server using HTTP digest
authentication.
No removes the password of the ACS connection request.
Configure the username of the ZyWALLfor the ACS server to authenticate the
ZyWALL using HTTP digest authentication.
No removes the password of the ACS server authentication request.
Chapter 36 System Remote Management
311