Chapter 52 Isp Accounts; Isp Accounts Overview; Pppoe And Pptp Account Commands - ZyXEL Communications UAG Series Reference Manual

Use ISP accounts to manage Internet Service Provider (ISP) account information for PPPoE and
PPTP interfaces.

52.1 ISP Accounts Overview

An ISP account is a profile of settings for Internet access using PPPoE, or PPTP.

52.1.1 PPPoE and PPTP Account Commands

The following table lists the PPPoE and PPTP ISP account commands.
Table 165 PPPoE and PPTP ISP Account Commands
COMMAND
show account [pppoe profile_name |
pptp profile_name]
[no] account {pppoe | pptp}
profile_name
encrypted-password ciphertext
[no] user username
[no] password password
[no] authentication {chap-pap |
chap | pap | mschap | mschap-v2}
[no] compression {yes | no}
[no] idle <0..360>
UAG CLI Reference Guide
C
HAPTER
DESCRIPTION
Displays information about the specified account(s).
Creates a new ISP account with name profile_name if necessary and enters
sub-command mode. The
no
profile_name: use 1-31 alphanumeric characters, underscores(
dashes (-), but the first character cannot be a number. This value is case-
sensitive.
Sets an encrypted secret for the specified ISP account.
ciphertext: You can use up to 128 printable ASCII characters. Spaces are
not allowed.
Sets the username for the specified ISP account. The
the username.
username: You can use alphanumeric, underscores (_), dashes (-), commas
(,), and characters, and it can be up to 64 characters long.
/@$
Sets the password for the specified ISP account. The
the password.
password: You can use up to 63 printable ASCII characters. Spaces are not
allowed.
Sets the authentication for the specified ISP account. The
the authentication to chap-pap.
Turns compression on or off for the specified ISP account. The
turns off compression.
Sets the idle timeout for the specified ISP account. The
the idle timeout to zero.
ISP Accounts
command deletes the specified ISP account.
command clears
no
command clears
no
no
no
5 2
), or
_
command sets
command
no
command sets
258