Table of Contents
Advertisement
14.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The potential problems are
divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
NBG7815 Access and Login
•
Internet Access
•
Resetting the NBG7815 to Its Factory Defaults
•
Wireless Connections
•
USB Device Problems
14.2 Power, Hardware Connections, and LEDs
The NBG7815 does not turn on. None of the LEDs turn on.
• Make sure you are using the power adaptor or cord included with the NBG7815.
• Make sure the power adaptor or cord is connected to the NBG7815 and plugged in to an
appropriate power source. Make sure the power source is turned on.
• Disconnect and re-connect the power adaptor or cord to the NBG7815.
• If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
• Make sure you understand the normal behavior of the LED. See
• Check the hardware connections. See the Quick Start Guide.
• Inspect your cables for damage. Contact the vendor to replace any damaged cables.
• Disconnect and re-connect the power adaptor to the NBG7815.
• If the problem continues, contact the vendor.
C
Troubleshooting
NBG7815 User's Guide
144
H A P T E R
Section 1.7 on page
14
14.
Advertisement
Table of Contents
