Firmware Upgrade Screen - ZyXEL Communications LTE3301 Series User Manual

Table 59 Maintenance > Time (continued)
L ABEL
Time Zone
Daylight Savings
Start Date
End Date
Apply
Cancel
20.6 Firm wa re Upg ra de Sc re e n
Find firmware at
extension, e.g., "V1.00(AAYE.0).bin". The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
Click
Ma inte na nc e > Firm wa re Upg ra de
LTE3301.
Chapter 20 Maintenance
DESC RIPT IO N
Choose the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
Daylight saving is a period from late spring to early fall when many countries set their clocks
ahead of normal local time by one hour to give more daytime light in the evening.
Select this option if you use Daylight Saving Time.
Configure the day and time when Daylight Saving Time starts if you selected
. The field uses the 24 hour format. Here are a couple of examples:
Sa ving s a t
Daylight Saving Time starts in most parts of the United States on the second Sunday of
March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M. local
time. So in the United States you would select
field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of the
time zones in the European Union start using Daylight Saving Time at the same moment (1
A.M. GMT or UTC). So in the European Union you would select
you select in the field depends on your time zone. In Germany for instance, you would
a t
select 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Configure the day and time when Daylight Saving Time ends if you selected
. The field uses the 24 hour format. Here are a couple of examples:
Sa ving s a t
Daylight Saving Time ends in the United States on the first Sunday of November. Each time
zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the
United States you would select
Daylight Saving Time ends in the European Union on the last Sunday of October. All of the
time zones in the European Union stop using Daylight Saving Time at the same moment (1
A.M. GMT or UTC). So in the European Union you would select
time you select in the
would select 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1).
Click to save your changes back to the LTE3301.
Apply
Click to begin configuring this screen afresh.
C a nc e l
www.zyxel.com in a file that uses the version number and project code with a "*.bin"
. Follow the instructions in this screen to upload firmware to your
LTE3301 Series User's Guide
Se c o nd
, ,
First Sunda y No ve m b e r
field depends on your time zone. In Germany for instance, you
a t
129
Da ylig ht
, , and select
Sunda y Ma rc h
, ,
L a st Sunda y Ma rc h
Da ylig ht
and select 2 in the field.
a t
, ,
L a st Sunda y O c to b e r
in the
2 a t
. The time
. The