Transceiver Removal; Figure 13 Transceiver Installation Example; Figure 14 Installed Transceiver; Figure 15 Opening The Transceiver's Latch Example - ZyXEL Communications ES-3124 User Manual

Figure 13 Transceiver Installation Example

2 Press the transceiver firmly until it clicks into place.
3 The switch automatically detects the installed transceiver. Check the LEDs to verify that
it is functioning properly.

Figure 14 Installed Transceiver

3.1.3.2 Transceiver Removal

Use the following steps to remove a mini GBIC transceiver (SFP module).
1 Open the transceiver's latch (latch styles vary).

Figure 15 Opening the Transceiver's Latch Example

2 Pull the transceiver out of the slot.

Figure 16 Transceiver Removal Example

Chapter 3 Hardware Overview
ES-3124 Series User's Guide
51