Figure 81 Multicast: Igmp Filtering Profile; Table 55 Multicast: Igmp Filtering Profile - ZyXEL Communications ES-3124 User Manual

ES-3124 Series User's Guide

Figure 81 Multicast: IGMP Filtering Profile

The following table describes the labels in this screen.

Table 55 Multicast: IGMP Filtering Profile

LABEL
Profile Name
Start Address
End Address
Add
Clear
Profile Name
Start Address
End Address
Delete
Cancel
182
DESCRIPTION
Enter a descriptive name for the profile for identification purposes.
To configure additional rule(s) for a profile that you have already added, enter the
profile name and specify a different IP multicast address range.
Type the starting multicast IP address for a range of multicast IP addresses that
you want to belong to the IGMP filter profile.
Type the ending multicast IP address for a range of IP addresses that you want to
belong to the IGMP filter profile.
If you want to add a single multicast IP address, enter it in both the Start Address
and End Address fields.
Click Add to save the settings to the switch.
Click Clear to clear the fields to the factory defaults.
This field displays the descriptive name of the profile.
This field displays the start of the multicast address range.
This field displays the end of the multicast address range.
To delete the profile(s) and all the accompanying rules, select the profile(s) that
you want to remove in the Delete Profile column, then click the Delete button.
To delete a rule(s) from a profile, select the rule(s) that you want to remove in the
Delete Rule column, then click the Delete button.
Click Cancel to clear the Delete Profile/Delete Rule check boxes.
Chapter 22 Multicast