ZyXEL Communications ES-3124 User Manual page 269

Table 87 interface port-channel Commands (continued)
COMMAND
broadcast-limit
multicast-limit
dlf-limit
diffserv
qos priority
mirror
speed-duplex
bpdu-control
<peer|tunnel|di
scard|network>
no
Chapter 34 Introducing Commands
DESCRIPTION
Enables bandwidth limits allowed
egress
for outgoing traffic on the port(s).
Sets the maximum bandwidth
egress <Kbps>
allowed for outgoing traffic on the
port(s).
Enables broadcast storm control
limit on the switch.
Sets how many broadcast packets
<pkt/s>
the interface receives per second.
Enables the interface multicast
limit.
Sets how many multicast packets
<pkt/s>
the interface receives per second.
Enables the Destination Lookup
Failure (DLF) limit.
Sets the interface DLF limit in
<pkt/s>
packets per second (pps).
Enables DiffServ on the port(s).
Sets the quality of service priority
<0 .. 7>
for an interface.
Enables port mirroring in the
interface.
Enables port mirroring for
dir
incoming, outgoing or both
<ingress|egress
incoming and outgoing traffic.
|both>
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
Sets the duplex mode (
<auto|10-
full
half|10-
1000
full|100-
the interface. Selecting
half|100-
(auto-negotiation) makes one port
full|1000-full>
able to negotiate with a peer
automatically to obtain the
connection speed and duplex
mode that both ends support.
Sets how Bridge Protocol Data
Units (BPDUs) are used in STP
port states.
egress set Disables the outgoing traffic port
list for a port-based VLAN.
<port-list>
Disables protocol based VLAN of
protocol-based-
the specified protocol on the port.
vlan ethernet-
type <ethernet-
type>
Disables IGMP immediate leave on
igmp-immediate-
the port.
leave
ES-3124 Series User's Guide
half or
) and speed ( 10 , 100 or
Mbps) of the connection on
auto
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
269