ZyXEL Communications ES-3124 User Manual page 74

ES-3124 Series User's Guide
Table 8 Status: Port Details (continued)
LABEL
PD
PowerConsumption
(mW)
(PWR models only)
PD MaxCurrent
(mA)
(PWR models only)
PD MaxPower (mW)
(PWR models only)
LACP
TxPkts
RxPkts
Errors
Tx KB/s
Rx KB/s
Up Time
Tx Packet
The following fields display detailed information about packets transmitted.
TX Packet
Multicast
Broadcast
Pause
Tagged
Rx Packet
The following fields display detailed information about packets received.
RX Packet
Multicast
Broadcast
Pause
Control
TX Collision
The following fields display information on collisions while transmitting.
Single
Multiple
74
DESCRIPTION
This field shows the power consumption of the powered device connected to the port.
This field is not available for the Gigabit and mini-GBIC ports.
This field shows the maximum current a powered device can get from the switch. If the
powered device's power consumption exceeds the maximum power offered by the
switch, the switch stops sending power.
The switch can provide up to 351.36mA current to one PD connected to each 10/
100Mbps Ethernet port and up to a total of 123.2W power to all PDs connected to the
switch.
This field is not available for the Gigabit and mini-GBIC ports.
This field shows the maximum power the switch can provide through this port.
This field is not available for the Gigabit and mini-GBIC ports.
This field shows if LACP is enabled on this port or not.
This field shows the number of transmitted frames on this port
This field shows the number of received frames on this port
This field shows the number of received errors on this port.
This field shows the number kilobytes per second transmitted on this port.
This field shows the number of kilobytes per second received on this port.
This field shows the total amount of time the connection has been up.
This field shows the number of good packets (unicast, multicast and broadcast)
transmitted.
This field shows the number of good multicast packets transmitted.
This field shows the number of good broadcast packets transmitted.
This field shows the number of 802.3x Pause packets transmitted.
This field shows the number of packets with VLAN tags transmitted.
This field shows the number of good packets (unicast, multicast and broadcast)
received.
This field shows the number of good multicast packets received.
This field shows the number of good broadcast packets received.
This field shows the number of 802.3x Pause packets received.
This field shows the number of control received (including those with CRC error) but it
does not include the 802.3x Pause frames.
This is a count of successfully transmitted frames for which transmission is inhibited by
exactly one collision.
This is a count of successfully transmitted frames for which transmission was inhibited
by more than one collision.
Chapter 6 System Status and Port Statistics